SACC-CI-M12FS-5CON-L90 SCO

https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, socket, 5-pos., A-coded, with angled solder connection, only contact insert Why buy this product  Reduced mounting costs thanks to two-piece device connector  All common pin assignments and codings available  Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate  Additional gasket for the device when not plugged in Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN GTIN 4046356438711 Weight per Piece (excluding packing) 4.970 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. 01/11/2017   Page 1 / 7 https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Technical data General Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Sealing material FKM / EPDM Cable Conductor cross section 0.34 mm² Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 01/11/2017   Page 2 / 7 https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 3 Drilling diagram 4 15 3,54 +0 1 9,8 2 5,8 8,03 11,57 Ø 2, 8 +0 Pin assignment M12 socket, 5-pos., A-coded, socket side view ,0 5 ø2 ,0 5 2 ,0 5 5 ±0,05 5xØ1,2 Drilling diagram only valid in connection with the SACC-M12-SCO NUT L90 housing (order no. 1432460) Dimensional drawing Dimensional drawing 15,9 15,9 8,5 26,29 1 4 5 2 3 19,2 Ø1 M12 flush-type connector, socket, contact carrier, side view M12 flush-type connector, socket, contact carrier, front view Dimensional drawing Dimensional drawing 20 10 12,5 ≤1,5 Optionally with O-ring (green) for tight seal when plugged in. - the axial mating force of 80 N per connector may not be exceeded when using with assembled O-ring! - Avoid radial forces! 2 Ø1 9,2 Ø7 Locked area on the PCB 01/11/2017   Page 3 / 7 https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27260701 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V  FILE E 118976 01/11/2017   Page 4 / 7 https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Approvals cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V  FILE E 118976 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Panel mounting base Housing screw connection - SACC-M12-SCO NUT - 1552243 M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers     Housing screw connection - SACC-DSIV-M12-NUT - 1416144 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier     Housing screw connection - SACC-M12-SCO NUT L 90 - 1432460 M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers     01/11/2017   Page 5 / 7 https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Accessories Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-F-M12/M15-7-THR - 1414003 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-F-M12/M15-6-THR SCO - 1414020 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-F-M12/M15-7-THR SCO - 1414005 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-M12 NUT PRESS - 1437889 Housing screw connection for two-piece M12 connectors for the reflow soldering process.     Protective cap 01/11/2017   Page 6 / 7 https://www.phoenixcontact.com/gb/products/1436644 Flush-type connector - SACC-CI-M12FS-5CON-L90 SCO - 1436644 Accessories Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/11/2017   Page 7 / 7